PSF-BotServer/config/worldserver.ini.dist

#######################################
# PSForever Server configuration file #
#######################################

###################################################################################################
# EXAMPLE CONFIG
#
#    Variable (type)
#        Description: Brief description what the variable is doing.
#        Important:   Annotation for important things about this variable.
#        Example:     "Example, i.e. if the value is a string"
#        Range:       [0, 10] - (Disabled, Enabled)
#        Default:     10 - (Enabled|Comment|Variable name in case of grouped config options)
#                     0  - (Disabled|Comment|Variable name in case of grouped config options)
#
# Note to developers:
# - Copy this example to keep the formatting.
# - Line breaks should be at column 100.
###################################################################################################

###################################################################################################
# WORLDSERVER SETTINGS
###################################################################################################

[worldserver]

#    ListeningPort (int)
#        Description: The UDP listening port for the worldserver.
#        Important:   Must be different from the loginserver.ListeningPort. Ports below 1024 are
#                     privileged on Linux and may require root.
#        Range:       [1, 65535] - (UDP port 1, UDP port 65535)
#        Default:     51001      - (Listen on UDP port 51001)

ListeningPort = 51001

###################################################################################################
# LOGINSERVER SETTINGS
###################################################################################################

[loginserver]

#    ListeningPort (int)
#        Description: The UDP listening port for the loginserver.
#        Important:   Must be different from the worldserver.ListeningPort. Ports below 1024 are
#                     privileged on Linux and may require root.
#        Range:       [1, 65535] - (UDP port 1, UDP port 65535)
#        Default:     51000      - (Listen on UDP port 5100)

ListeningPort = 51000

###################################################################################################
# NETWORK SETTINGS
###################################################################################################

[network]

#    Session.InboundGraceTime (time)
#        Description: The maximum amount of time since the last inbound packet from a UDP session
#                     before it is dropped.
#        Important:   Lower values will cause legitimate clients to be dropped during loading
#                     screens, but higher values will make the server be more susceptible to
#                     denial of service attacks and running out of memory.
#        Range:       [10 seconds, 10 minutes] - (10 second grace, 10 minute grace)
#        Default:     1 minute                 - (Clients sending a packet at least
#                                                 once a minute stay alive)

Session.InboundGraceTime = 1 minute

#    Session.OutboundGraceTime (time)
#        Description: The maximum amount of time since the last outbound packet for a UDP session
#                     before it is dropped. Can be used as a watchdog for hung server sessions.
#        Important:   Lower values will cause legitimate clients to be dropped during server
#                     lag spikes or Zone transitions.
#        Range:       [10 seconds, 10 minutes] - (10 second grace, 10 minute grace)
#        Default:     1 minute                 - (Clients receiving a packet at least
#                                                 once a minute stay alive)

Session.OutboundGraceTime = 1 minute

###################################################################################################
# DEVELOPER SETTINGS
#    - NETWORK SIMULATOR
###################################################################################################

[developer]

###################################################################################################
# NETWORK SIMULATOR
#
#    NetSim.Active (boolean)
#        Description: Enable artificial packet unreliability. Used for development testing.
#                     Active equally on upstream and downstream packets.
#        Important:   DO NOT enable on servers with a high packet rate as buffering increases
#                     the memory load of the server and it will (by design) affect performance.
#        Default:     no  - (Disabled)
#                     yes - (Enabled)
NetSim.Active = no

#    NetSim.Loss (float)
#        Description: The percentage of outgoing and incoming packets that are dropped.
#        Range:       [0.0, 1.0] - (0% loss, 100% packet loss)
#        Default:     0.02       - (2% packet loss)

NetSim.Loss = 0.02

#    NetSim.Delay (time)
#        Description: The time a packet is buffered before being delivered to simulate delay.
#                     The artificial delay is in addition to any real network latency.
#        Important:   Longer delays will lead to larger packet buffering, which may cause
#                     out-of-memory errors depending on packet rate.
#        Range:       [0, 2 seconds]   - (No delay, 2 seconds delay)
#        Default:     150 milliseconds - (Packets lag for 150 milliseconds)

NetSim.Delay = 150 milliseconds

#    NetSim.ReorderChance (float)
#        Description: The percentage chance that a packet will be ordered randomly in the delay
#                     buffer. If the NetSim.Delay is too small then packets won't be reordered.
#        Range:       [0.0, 1.0] - (No packet reordering, reorder every packet)
#        Default:     0.005      - (0.5% chance of a packet being reordered)

NetSim.ReorderChance = 0.005

#    NetSim.ReorderTime (time)
#        Description: If a packet is reordered, the maximum time in the future or the past where
#                     it will randomly appear.
#        Range:       [0, 2 seconds]   - (No packet reordering, randomly shift +/- 2 seconds)
#        Default:     150 milliseconds - (+/- 150 milliseconds)

NetSim.ReorderTime = 150 milliseconds

#
###################################################################################################